| Instructions - Sticky Paper Pictures |
Sticky Paper Pictures by JKM
Supplies:
P K Glitz Sticky Paper
P K Glitz Glitters in Assorted Colors
P K Glitz Glitter - Crystal or White Pearl
Small Spoon
Metal Stencils
Coffee Filters
P K Glitz Sticky Paper
P K Glitz Glitters in Assorted Colors
P K Glitz Glitter - Crystal or White Pearl
Small Spoon
Metal Stencils
Coffee Filters
Sticky Paper Pictures
Instructions:
1. Pour your glitters into round "coffee filters". You will find it much easier to work out of these and when you are through your
glitter will pour easily back into the jar. Also apply glitters with a small spoon or straw cut on a diagonal.
2. Cut your PK Glitz Sticky Paper 1/4" larger all around than your metal stencil and gently remove the backing.
3. Lay your clean metal stencil on the "sticky" side of the paper.
4. Apply PK Glitz Micro Glitter to outer edge first. This will "kill" the edge and keep the colors that you will use later on the center
part of the stencil from discoloring your edge.
5. After coloring the edge of your piece, begin adding colors to the center until you have completely covered all areas exposed.
6. TIP Be sure, after each application of glitter, to softly brush the excess back into your working container.
7. Tap off any excess glitter and now peel the paper from the metal stencil by gently pulling them apart. Hold the stencil down
tightly to the table as you pull up the paper. This keeps you from bending the stencil. If you have difficulty removing the paper
from the stencil, TIP try using a little bar soap on the stencil before laying it on the sticky paper.
8. After removing paper from stencil, pour your crystal or white pearl glitter over the entire piece covering any area that is still
sticky. This will complete your picture.
9. Using glue stick or other adhesive, mount picture to cardstock and embellish as you like.
Instructions:
1. Pour your glitters into round "coffee filters". You will find it much easier to work out of these and when you are through your
glitter will pour easily back into the jar. Also apply glitters with a small spoon or straw cut on a diagonal.
2. Cut your PK Glitz Sticky Paper 1/4" larger all around than your metal stencil and gently remove the backing.
3. Lay your clean metal stencil on the "sticky" side of the paper.
4. Apply PK Glitz Micro Glitter to outer edge first. This will "kill" the edge and keep the colors that you will use later on the center
part of the stencil from discoloring your edge.
5. After coloring the edge of your piece, begin adding colors to the center until you have completely covered all areas exposed.
6. TIP Be sure, after each application of glitter, to softly brush the excess back into your working container.
7. Tap off any excess glitter and now peel the paper from the metal stencil by gently pulling them apart. Hold the stencil down
tightly to the table as you pull up the paper. This keeps you from bending the stencil. If you have difficulty removing the paper
from the stencil, TIP try using a little bar soap on the stencil before laying it on the sticky paper.
8. After removing paper from stencil, pour your crystal or white pearl glitter over the entire piece covering any area that is still
sticky. This will complete your picture.
9. Using glue stick or other adhesive, mount picture to cardstock and embellish as you like.
